diff --git a/src/src/main.cpp b/src/src/main.cpp
index 03f9e0e..5bca104 100644
--- a/src/src/main.cpp
+++ b/src/src/main.cpp
@@ -7,9 +7,9 @@
 constexpr byte ENCODER_CLK_PIN = 11;
 constexpr byte ENCODER_DT_PIN = 12;
 constexpr byte BUTTON_PIN = 2;
-constexpr byte RGB_RED_PIN = 3;
-constexpr byte RGB_GREEN_PIN = 5;
-constexpr byte RGB_BLUE_PIN = 6;
+
+constexpr byte RGB_LED[] = {2, 5, 6};
+
 constexpr byte SERVO_PIN = 9;
 constexpr byte BUZZER_PIN = 8;
 
@@ -82,28 +82,28 @@ void ConfirmSound() {
 }
 
 void OpenLED() {
-    analogWrite(RGB_GREEN_PIN, 120);
-    analogWrite(RGB_BLUE_PIN,  0);
-    analogWrite(RGB_RED_PIN,   0);
+    analogWrite(RGB_LED[1], 120);
+    analogWrite(RGB_LED[2],  0);
+    analogWrite(RGB_LED[0],   0);
 }
 
 void CloseLED() {
-    analogWrite(RGB_GREEN_PIN, 0);
-    analogWrite(RGB_BLUE_PIN,  0);
-    analogWrite(RGB_RED_PIN,   120);
+    analogWrite(RGB_LED[1], 0);
+    analogWrite(RGB_LED[2],  0);
+    analogWrite(RGB_LED[0],   120);
 }
 
 void NeutralLED() {
-    analogWrite(RGB_GREEN_PIN, 0);
-    analogWrite(RGB_BLUE_PIN,  120);
-    analogWrite(RGB_RED_PIN,   0);
+    analogWrite(RGB_LED[1], 0);
+    analogWrite(RGB_LED[2],  120);
+    analogWrite(RGB_LED[0],   0);
 }
 
 void BlockedLED() {
     const bool blink = millis() / 500 % 2 == 0;
-    analogWrite(RGB_RED_PIN,   blink ? 120 : 0);
-    analogWrite(RGB_GREEN_PIN, 0);
-    analogWrite(RGB_BLUE_PIN,  0);
+    analogWrite(RGB_LED[0],   blink ? 120 : 0);
+    analogWrite(RGB_LED[1], 0);
+    analogWrite(RGB_LED[2],  0);
 }
 
 void showEntryScreen(const bool showValue) {
@@ -209,9 +209,9 @@ void setup() {
     Serial.println("Nastavování pinů");
 
     pinMode(BUTTON_PIN,      INPUT); Serial.println("Piny: 1/8");
-    pinMode(RGB_RED_PIN,     OUTPUT);         Serial.println("Piny: 2/8");
-    pinMode(RGB_GREEN_PIN,   OUTPUT);         Serial.println("Piny: 3/8");
-    pinMode(RGB_BLUE_PIN,    OUTPUT);         Serial.println("Piny: 4/8");
+    pinMode(RGB_LED[0],     OUTPUT);         Serial.println("Piny: 2/8");
+    pinMode(RGB_LED[1],   OUTPUT);         Serial.println("Piny: 3/8");
+    pinMode(RGB_LED[2],    OUTPUT);         Serial.println("Piny: 4/8");
     pinMode(ENCODER_CLK_PIN, INPUT);          Serial.println("Piny: 5/8");
     pinMode(ENCODER_DT_PIN,  INPUT);          Serial.println("Piny: 6/8");
     pinMode(SERVO_PIN,       OUTPUT);         Serial.println("Piny: 7/8");